ABS is a division of Hollenbeck Industries; we always strive to break new boundary’s and deliver better products to our customers. With 10 years of service delivering products and services to customers around the world you can rest assured that you will receive a quality product with outstanding customer service.

Offering great products at an affordable rate that allows our customers the ability to build the future is our mission with ABS. Automation and ease of use are our main design features we focus on when designing our machines. See our printer line up and specifications on the next page. 

3D Printing offers many advantages from rapid R&D of products and devices to the ability to print geometry not producible using conventional machining methods. We envision our printers being used by a wide variety of customers. Because we are engineers that use 3D printers ourselves on a daily basis we know how important the small details are. 

3D printing should be easy enough for any skill level, that is what we are trying to provide. 

Upgrade the L1 to its full potential with the Pro package. This includes upgrading the drive motors, and changing to a pellet feed system. This allows you to be able to print continuous with out filament limitations. 

Lager Volume Production 3D Printer

• Printer Type: FDM(Fused Deposition Modeling)
• Print Volume: 30”x30”x30” (762 x 762 x 762)
• Heated Chamber: 120C/248F
• Heated Bed: 180C/356F
• Print Head Config: 4, 3, 2, 1
• Nozzle Temp: 500C/932F
• Nozzle Type: Carbide
• Materials: ABS, PLA, PETG, ASA, PP, Polycarbonate, Nylon, Fiber reinforced filament, PEEK, PEKK, PEI, PES, TPI, POM
• Print Speed: TBD
• Drive Type: High End Servos
• Motion System: Hardened Ground Rails, with Ball Screws
• Power: 208V – 15amps
• Filament: Pellet Hopper

FFF Printing: Fused Filament Fabrication (FFF) use plastic and composites spools to build objects from the most complex geometries to simple spacers and tooling.

The S1 uses the same features and benefits that makes the L1 and L1-Pro so good but packed in to a desktop package. Making this great for engineers, schools, and hobbyists.

• Print Volume: 12”x12”x12” (304.8 x 304.8 x 304.8)
• Heated Chamber: 120C/248F
• Heated Bed: 180C/356F
• Print Head Config: 2, 1
• Nozzle Temp: 500C/932F
• Nozzle Type: Carbide
• Materials: ABS, PLA, PETG, ASA, PP, Polycarbonate, Nylon, Fiber reinforced filament, PEEK, PEKK, PEI, PES, TPI, POM
• Print Speed: TBD
• Drive Type: Stepper
• Motion System: Hardened Ground Rails, with Ball Screws

FFF Printing: Fused Filament Fabrication (FFF) use plastic and composites spools to build objects from the most complex geometries to simple spacers and tooling.